Buy GLOW 70 Pen in the UK
GLOW, a 70 mg skin-and-repair blend (GHK-Cu 50 + BPC-157 10 + TB-500 10) in one click pen. Each click delivers 233 µg from a 3 mL · 300-click pen.
Featured in these stacks: Advanced Summer Stack.
how many clicks
for your dose?
This GLOW 70 pen holds 70 mg across 300 clicks, so each click delivers 233 µg. Tap a dose or turn the dial; we'll count the clicks. For research reference only.
why researchers chose this pen
chose it for the click dosing, no syringes, no unit maths.
verified purity, checked against the public CoA before first use.
precise clicks in every 3 mL pen, the whole protocol in one barrel.
re-order or refer a colleague within three months.
about the
GLOW 70 pen
GLOW pairs GHK-Cu with BPC-157 and TB-500 in a single 70 mg blend pen (50 + 10 + 10), for skin and repair research.
Certificate of analysiswhy a pen beats
a vial & syringe
Traditional research peptides arrive as lyophilised powder that must be reconstituted, drawn into insulin syringes, and converted from milligrams to units by hand, every step a chance for a dosing error.
A multi-dose pen removes the whole failure chain. The peptide arrives already dissolved and calibrated. Attach a fresh needle, turn the dial until you count your clicks, and you're done, the same audible-click mechanism trusted in insulin and GLP-1 pens worldwide.
Pens travel and store better, too: no open vials, no bent needles, no septum contamination after repeated draws. One sealed barrel, ten sterile needles, one dosing card.
how to buy
peptides safely
The peptide market has a purity problem: independent surveys routinely find underdosed, mislabelled or contaminated product sold online. The only reliable defence is third-party verification you can check yourself, not a supplier's own claims.
Before buying any peptide pen, ask three questions. Is every batch tested by an independent lab? Is the certificate of analysis available, so you can check your exact lot before first use? And does it ship cold-chain, insulated and gel-packed, so what was tested is what arrives?
Veyvora answers yes on every order, independent assay, a CoA on request against the batch number, and cold dispatch within 24 hours, paperwork packed inside.
pairs well with
view all
Overview
This page sets out what the GLOW 70 Skin Repair Pen contains, how the three peptides in the blend are presented in the pen format, what batch documentation to request with an order, and how to store the pen on receipt.
The GLOW 70 Skin Repair Pen is a 70 mg research-peptide blend comprising GHK-Cu 50 mg, BPC-157 10 mg and TB-500 10 mg, supplied in a 3 mL, 300-click multi-dose pen format for in-vitro laboratory research (Veyvora product specification, 2026). Each click delivers approximately 233 µg of the combined blend. Confirm current GBP pricing and stock directly with the operator before ordering.
| Specification | Detail |
|---|---|
| Blend name | GLOW 70 Skin Repair Pen |
| Total peptide content | 70 mg |
| Composition | GHK-Cu 50 mg · BPC-157 10 mg · TB-500 10 mg |
| Volume | 3 mL |
| Clicks per pen | 300 |
| Dose per click | ~233 µg (combined blend) |
| Intended use | Research use only, not for human or animal use |
Each batch is linked to a batch number and a Certificate of Analysis (CoA); request the current CoA with your laboratory order and match it to the batch number on the pen before first use.
Product Identity and Scope
This listing covers a single product: the GLOW 70 Skin Repair Pen, a 70 mg research-peptide blend comprising GHK-Cu 50 mg, BPC-157 10 mg and TB-500 10 mg, supplied in a 3 mL, 300-click multi-dose pen format for in-vitro laboratory research (Veyvora product specification, 2026). Each click delivers approximately 233 µg of the combined blend, calculated as 70 mg divided across 300 clicks.
GHK-Cu is a copper-binding tripeptide studied for its extracellular-matrix signalling; BPC-157 and TB-500 are the two peptides of Veyvora’s repair and recovery range. Verify your GLOW 70 batch against its CoA before first use, and read what HPLC purity does and does not prove for how the purity figure on the certificate is measured and reported.
Confirm the exact physical format (pre-filled pen, cartridge or lyophilised vial) with the operator when ordering, together with current GBP pricing and UK stock status.
Verified Specifications
Composition and Format
| Parameter | Specified value | Source |
|---|---|---|
| Total peptide content | 70 mg | Veyvora product specification, 2026 |
| GHK-Cu | 50 mg | Veyvora product specification, 2026 |
| BPC-157 | 10 mg | Veyvora product specification, 2026 |
| TB-500 | 10 mg | Veyvora product specification, 2026 |
| Fill volume | 3 mL | Veyvora product specification, 2026 |
| Clicks per pen | 300 | Veyvora product specification, 2026 |
| Dose per click | ~233 µg (combined) | Calculated: 70 mg ÷ 300 |
| Physical format | Confirm with operator | — |
Confirm the physical format (pre-filled pen, lyophilised vial or cartridge) with the operator when ordering. Researchers evaluating BPC-157 and TB-500 in isolation can consult the BPC-157 versus TB-500 comparison page, which covers what each peptide is studied for and the analytical distinctions between them.
Batch Documentation and Analytical Evidence
Each GLOW 70 Skin Repair Pen batch is linked to a batch number, a CoA and stated analytical methods. The full CoA for a specific lot, with its purity values, chromatograms and test dates, is provided by the operator on request; ask for it with your order.
Reading the Certificate of Analysis
The CoA records UPLC/MS (ultra-performance liquid chromatography/mass spectrometry) purity results cross-referenced to the batch number printed on the vial, with testing attributed to a named third-party laboratory. The purity line reports the chromatographic purity measured for that batch against the stated threshold; the chromatogram shows the peaks behind the figure, and the mass spectrometry result confirms the identity of the peptides. Request the full certificate, with the threshold and chromatogram, so that the figure can be read in context.
Storage Conditions and Measured Purity
The European Medicines Agency’s (EMA) guideline on synthetic peptides notes that peptides are often hygroscopic, meaning they readily absorb moisture from the air, and that storage and handling conditions directly affect measured purity, so a CoA result is read together with the cold-chain and desiccation conditions recorded between manufacture and testing [1]. Request the full CoA, the test date, and the storage conditions recorded at the time of analysis with each batch for in-vitro use.
Researchers evaluating a broader skin-focused research stack can review the Skin Stack research pens page for related catalogue options, and Repair & Recovery Research Pens for other formats with comparable documentation.
Handling and Storage
Store GLOW 70 at 2–8 °C, protected from moisture and light. These conditions align with the EMA’s synthetic-peptides guideline, which recommends refrigerated storage at 5 °C ± 3 °C or frozen conditions at −20 °C ± 5 °C to minimise degradation; where desiccation is a concern, the guideline notes that inert-atmosphere or desiccant storage may be appropriate [1].
Veyvora states that GLOW 70 orders are dispatched in insulated, gel-packed 2–8 °C mailers fitted with a temperature-indicator strip within 24 hours of order; confirm current delivery availability for your specific market before placing an order (Veyvora shipping specification, 2026). Request the product-specific stability data, including shelf life after first use and in-use storage duration for the multi-dose pen format, from the operator before first use.
To match the batch number printed on the pen against its public certificate, use the verify your GLOW 70 batch against its CoA tool. For how an HPLC (high-performance liquid chromatography) purity figure is measured and what it reports about identity and stability, see what HPLC purity does and does not prove.
Ordering Information
GLOW 70 Skin Repair Pen orders are fulfilled by Veyvora, which states same-day dispatch for orders placed before the daily cut-off, with delivery into the UK market via insulated cold-chain mailers (Veyvora ordering page, 2026). Pricing, current stock status and precise cut-off times are live-page values; confirm them directly with the operator before placing an order, as the homepage listing and the product page may be updated at different times.
What to Confirm Before Ordering
Contact the operator to confirm the following before purchase:
- Current GBP price and any volume or distributor pricing tiers
- Live UK stock availability and estimated dispatch date
- Delivery cut-off time for next-day UK service and cold-chain mailer specification, including temperature-indicator strip inclusion
- CoA availability for the specific batch number assigned to your order
- Export or import requirements applicable to your market
Batch documentation, CoA availability and storage conditions are the three items to settle when ordering. For handling requirements that apply from the moment of receipt, see storage and stability guidance for research peptides. Researchers evaluating the BPC-157 and TB-500 components individually before choosing the blend can refer to the BPC-157 versus TB-500 comparison page.
Research Use
The GLOW 70 Skin Repair Pen is supplied for in-vitro laboratory research, such as cell-culture and extracellular-matrix models and use as an analytical reference material (Veyvora product disclaimer, 2026). Not for human or veterinary use. Buyers planning a broader in-vitro programme can review the Skin Stack research pens catalogue, or consult Repair & Recovery Research Pens for other formats in the range.
Related Research and Comparison Pages
Two analytical steps sit between the CoA and first use: matching the batch number on the pen to the public certificate, and reading the HPLC purity figure in context. For the first, verify your GLOW 70 batch against its CoA before handling the material. For the second, what HPLC purity does and does not prove explains what a purity percentage reports about identity and stability, which is useful when comparing certificates that differ in method or scope [1].
When comparing documentation, the useful criteria are traceability: batch ID format, named testing laboratory, assay method (HPLC, mass spectrometry, endotoxin), and whether the CoA is available before purchase. Confirm the physical format against your laboratory protocol when ordering.
Confirm current stock and delivery availability for your location directly with the operator, cross-reference the batch number printed on the pen against the public CoA before first use, and then proceed to the operator checkout to place your order.
Key Takeaways
- The GLOW 70 Skin Repair Pen contains 70 mg total peptide across three compounds, GHK-Cu 50 mg, BPC-157 10 mg and TB-500 10 mg, in a 300-click, 3 mL pen delivering approximately 233 µg per click.
- Each batch is linked to a batch number and a CoA; request the full CoA, test date and storage conditions at analysis with your order.
- Store at 2–8 °C, protected from moisture and light; Veyvora dispatches in insulated, gel-packed 2–8 °C mailers fitted with a temperature-indicator strip.
- Confirm GBP pricing, UK stock status, physical format and cold-chain specification directly with the operator before ordering.
